Hand brake lever pin.
Slides the through the holes of the centering support on the floor and hole at the rear of the emergency brake handle. Pin uses clip that is also available.
These pins have a tendency to self machine on the sheet metal where they slide through the body. So if yours has done this it needs to be replaced or you will have slop in the handle and difficulty achieving proper tension of the brake cables.
Includes: 1 Hand Brake Lever Pin
FITS:
(IMPORTANT NOTE) This Later Style pin is for 85-93 Mk1 & Mk2 VW, if you have a 74-84 Mk1 Rabbit, Scirocco, Pickup, Convertible or Jetta you will also need the clip for this pin, which is available as a set or conversion kit in our catalog, the original style pin is no longer available.
Cabriolet 1985-1993 North American and European Market Cars
Scirocco 1985-1992 North American and European Market Cars
Mk2 Golf 1985-1993 (Fits all Mk2 Which Use a Pin to mount the handle to the floor, Not Needed on Handle That Bolts to floor)
Mk2 Jetta 1985-1992 (Fits all Mk2 Which Use a Pin to mount the handle to the floor, Not Needed on Handle That Bolts to floor)