(as seen in the image with a detailed list below)
(1) Stainless braided Fuel accumulator to primary steel feed Line with additional abrasion sleeve
Mk1 Originals introduces our new line up of direct replacement OEM Fuel Pump / Accumulator hoses and kits.
If your car has sat idle in the past for long periods or your fuel tank
and filler neck has become rusted this kit is an essential component to
keep it from returning. Once the rust has taken hold in the fuel system
it will begin to break down all components from the inside out and its
only a matter of time before its back again clogging up vital components
and eventually breaking down completely.
All components are manufactured in Germany then assembled in the USA
got together with the original Mfg. in Germany and purchased all the
assembly tooling Zinc coated steel fittings, hoses, abrasion sleeves
and collars all are OEM and meet or exceed DOT/TUV standards. All rubber hose have a minimum testing pressure of 30bar (450 psi) far exceeding your needs and come with a Mk1 Originals limited warranty.
All Stainless braided and Rubber Hose used in kits are inside textile braided and outside abrasion resistant.Through testing we decided to add an extra level of saftey by adding the black braided Polyamide sleeve as
seen with the company logo in the image. Sleeves keep the hose
itself from contact on any bare metal and aid in the routing of the
hoses around the body for a clean installation.
FITS: 8V and 16V CIS Vehicles Below
VW Scirocco 1984-1989 (North American Market)
VW Scirocco 1984-1992 (European Market)
FUEL SYSTEM IS
UNDER VERY HIGH PRESSURE ITS HIGHLY RECOMENDED IF YOU DONT KNOW WHAT
YOUR DOING AROUND THEM YOU LET SOMEONE WHO DOES HANDLE THE JOB.