Pump, Tank, Feed , Return and Accumulator hoses.
If your car has sat idle in the past for long periods or your fuel tank
and filler neck has become rusted this kit is an essential component to
keep it from returning. Once the rust has taken hold in the fuel system
it will begin to break down all components from the inside out and its
only a matter of time before its back again clogging up vital components
and eventually breaking down completely. Kit are also available and
contain all hoses, lines and clamps for replacement of all your factory
hoses which connect the fuel tank to fuel pump, accumulator and
expansion tank with a few exceptions noted under each models specific
kit
All components are manufactured in Germany then assembled in the USA
We got together with the original Mfg. in Germany
and purchased all the assembly tooling Zinc coated steel fittings,
hoses, abrasion sleeves and collars all are OEM and meet or exceed
DOT/TUV standards. All rubber hose have a minimum testing pressure of 30bar (450 psi)
far exceeding your needs and come with a Mk1 Originals limited warranty.
All Stainless braided and Rubber Hose used in kits are inside textile braided and outside abrasion resistant.
Through testing we decided to add an extra level of safety by adding the black braided Polyamide sleeve as
seen with the company logo in the image. Sleeves keep the hose
itself from contact on any bare metal and aid in the routing of the
hoses around the body for a clean installation.
FITS: CIS Fuel Injected Vehicles Below
VW Cabriolet 1985-1989 (North American Market)
VW Cabriolet 1985 - 1992 (CIS ONLY) (European Market)
WARNING:
FUEL SYSTEM IS UNDER VERY HIGH PRESSURE ITS HIGHLY RECOMENDED IF
YOU DONT KNOW WHAT YOUR DOING AROUND THEM YOU LET SOMEONE WHO DOES
HANDLE THE JOB.
COMBINED SHIPPING: See Payment Details Below For Multiple Item Purchase Instructions
Mk1 Autohaus / Mk1 Originals WARRANTY INFORMATION
MK1
Autohaus / MK1 Originals warrant that goods sold by it shall be free
from defects in material and workmanship, and shall conform to all
applicable specifications and drawings. MK1 Originals liability, whether
based on breach of warranty of contract or negligence in manufacturing,
shall by limited to replacement or repair (at MK1 Originals inspection)
of the defective or nonconforming goods, or (at MK1 Originals election)
refund of the purchase price. This warranty shall apply, and MK1
Originals shall be liable for replacement, repair, or refund, only if
the buyer has given MK1 Originals written notice of the defect or
nonconformity within 30 days after the delivery of goods to buyer. After
30 days returns will only be acceptable for store credit or
exchange.MK1 Originals assumes no liability over the results of the use
of any goods purchased from MK1 Originals including, without limitation,
their use in combination with other components, assemblies or products,
or their suitability for a particular environment. The foregoing
constitutes the sole and exclusive warranty of MK1 Originals and the
sole and exclusive remedy of the buyer, and is in lieu of all other
warranties, expressed or implied, as to merchantability, fitness for the
purpose sold, description, quality, or any other matter. Without
limiting the foregoing, MK1 Originals shall in no way be liable for loss
of use or profit, or for other collateral, special or consequential
damages. Any warranty given by any other manufacturer or supplier of
goods sold or of component parts thereof is assigned by MK1 Originals to
the buyer to the extent permissible under law and terms of such
warranty.
_thumbnail.jpg)
