Black EPDM Rubber Dual / Double Brake
line mounting buffer /grommet, also referred to as an isolator. These
are used to isolate the hard steel brake lines from the car chassis
where they run in contact with the undercarriage, they cushion the brake
line and reduce road noise.
It is very important you read the fitment notes
as there are 2 versions of this grommet both look the same but outside
diameter's differ. The diameter is important as the clip welded on the
undercarriage to wrap over the grommet must be able to enclose properly.
GROMMET SPECIFICATION
Designed to Enclose two 4.5mm/.175" metal brake lines
ID 5.55 / .217"
OD 28mm/1.10"
Height 16mm / .635"
Width 15mm / .585"
(If you do not see your vehicle
listed below there is an earlier and smaller version of this
buffer/grommet available from our store)
Includes: 1 New Dual/Double Brake Line Grommet
Fits: (North American and European Market VW Listed)
1979-1980 Rabbit
1979-1980 Pickup
1979-1983 Mk1 Golf
1983-1992 MK1 Caddy
1979-1984 Rabbit Convertible
1985-1993 Cabriolet
1979-1989 Scirocco
1979-1984 Jetta
_thumbnail.jpg)
